VR Tuned ECU Flash Tune Audi RS4 4.2 FSI V8 420hp B7 2004-2008

The V8 Audi RS4 was a dream coming to the states since we were skipped on the earlier generations. Its stout engine, flared fenders, and aggressive handling makes the RS4 one of Audi's best. With a new Stage 1 calibration, you are able to gain improved performance throughout the entire power curve. Once tuned, your car will have much better throttle response no matter what type of transmission you have. Where your car is sluggish off the line, your newly flashed car picks up right away and pulls harder through the mid and top end RPM range. Overall, the characteristics are vastly improved while providing you additional benefits that your car craves for.

Crank Horsepower Ratings:

• Stock Power: 420HP | 317ft/lbs
• Stage 1 Tuned Power: 438HP | 332ft/lbs
• Stage 2 Tuned Power: 455HP | 338ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use our OBDII VR Tuned iFlash Cable. This REQUIRES a Windows can flash between tuned and stock at anytime.  See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

Options:

• You can select to get both Stages of our Tune.  The Stage 2 is usually for those looking to maximize the performance of their vehicle.  Though not required unless stated, this is usually for those running a performance exhaust and at least 91-93 octane fuel. Can only be done if OBDII flashing is available.

For reference this ECU is a Bosch MED911 (GreenOak)x2.