VR Tuned ECU Flash Tune Porsche 991.2 Carrera GTS 3.0L Turbo 450hp

The Porsche 991.2 Carrera GTS features the 3.0L turbocharged engine which can unleash some serious performance. VR Tuned will dramatically change the way the vehicle drives once it has been flashed. With our ECU Tuning, we can change the way the cars torque comes on, give you stronger mid-range pull, and even improve the top end all the way to redline. The powerband will come on sooner and the throttle pedal will feel more responsive. The increase in boost pressure will have you blown away with the performance of your 991.2 Carrera GTS.

Crank Horsepower Ratings:

• Stock Power: 450 HP | 405FT/LBs
• Tuned Power: 490 HP | 440FT/LBs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, headers, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the DimSport handheld device. This REQUIRES a Windows PC.  You can flash between the stock and tuned at anytime. The ECU must be sent to us first to be unlocked on the bench. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port after it has been unlocked on the bench.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.  See Instructions Here.

For reference, this ECU is a Siemens SDI21.