VR Tuned ECU Flash Tune Porsche Cayenne 957 GTS 4.8L V8 DFI 08-10

The 957 Porsche Cayenne is a nice change over the previous 955 models. The new Cayenne GTS is now Direct Fuel Injection with a 4.8L V8 engine that is equipped for the sportier driver. With stock 405hp at the crank, tuning the GTS allows for another 15 horsepower and 20ft/lbs of torque to the crank. The biggest difference when you flash the Cayenne 957 GTS is the overall improvement of the power curve. The truck has much better throttle response and improved torque for those times you need to haul some other toys. The newly flashed truck picks up right away and pulls harder through the mid and top end RPM range. Overall, the daily driving characteristics are vastly improved while providing you additional benefits that the Porsche craves.

Crank Horsepower Ratings:

• Stock Power 405HP | 369ft/lbs
• Tuned Power 428HP | 391ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use our OBDII VR Tuned iFlash Cable. This REQUIRES a Windows PC. You can flash between tuned and stock at anytime.  See Instructions Here.
• Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
• Use the DimSport handheld device.  You can flash between the stock and tuned at anytime. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection. See ECU removal instructions here.

For reference, this ECU is a Siemens SDI4.