VR Tuned ECU Flash Tune BMW X5 40d F15 313HP

Tuning the ECU of your BMW x5 40d F15 is possible with VR Tuned. Tuning this ECU requires special hardware to flash the ECU which we have. Superior to a plug and play piggyback, we can transform your turbocharged diesel engine into a beast. Get ready for crazy 0-60 times and the ability to pull a house with a gain of almost 100FT/LBs of torque! The driving characteristics are vastly improved while providing you additional benefits that your engine craves for. With this additional programming to adjust your ecu calibrations, we also make changes to the torque limiter to provide better throttle response. Performance numbers are rated to the crank.

• Stock Power: 313HP | 465FT/LB
• Tuned Power: 360HP | 546FT/LB

You no longer have to remove your ECU to have it tuned. VR Tuned does all F Series ecu tuning through the OBDII port with our iFlash system!What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

For reference this ECU is a EDC17CP49.