VR Tuned ECU Flash Tune Polaris RZR XP Turbo 2016
Prix habituel
€400,00 EUR
Prix habituel
Prix soldé
€400,00 EUR
Prix unitaire
par
VR Tuned offers ECU tuning to enhance the performance of your Polaris RZR xP Turbo 2016 year. By doing an ECU Flash for the RZR xP Turbo, you can greatly improve the performance of your Polaris from it's stock 144 horsepower. ECU Tuning is done to take into account your driving style, modifications, and environment. With basic bolt-ons such as intake or exhaust, the ECU will adjust giving you more power and torque. Typically, a Stage 1 tune with the stock exhaust system will run 15-16psi of boost. When you add an exhaust system, the reduced restriction allows your turbocharger to flow better. This will help yield the full potential of your turbocharger seeing boost at 17-17.5 psi as set in the ECU Mapping. Using higher octane fuel will always perform better. The VR Tuned ECU Flash has been tested using our Mustang Dyno for optimal air fuel ratios. We have tested all our products in real world conditions and even compared them to the competition. The VR Tuned RZR xP Turbo ECU Tune is equilvalent to what others call a Stage 1, Stage 2, or Stage 3 but without the need to buy separate files. With VR Tuned, we give you the best file the first time!
Horsepower Gains (dependent on fuel and modifications)
- 20-25 horsepower 91 octane with or without exhaust
- 25-30 horsepower 93+ octane with aftermarket exhaust
- 30-35 horsepower 100 octane, aftermarket exhaust and header pipe, intake, plugs, diverter valve, charge pipes
What does the ECU Flash do?
- Speed Limiter Raised
- Rev Limiter Raised
- Improved Throttle Response - Enhanced E-Throttle
- Torque Limiters Adjusted
- Cooling fan temp lowered
- Left Foot Braking Enabled
- Much improved driving experience!
- Read More About Our Testing Here
- Note: To get the maximum performance out of this ECU flash, please tighten your wastegate rod down to limit the travel. The factory wastegate is very soft and weakens over time. The ECU calls for more boost pressure but the wastegate will not allow for this without adjustment.
- #1 priority is our customer service to you!
- Our tuning is used worldwide.
- Basic bolt-on performance parts will not require a retune of your ECU. Other efficiency parts such as colder spark plugs, boost tubes, or diverter valves are not required but can help performance. The ECU will adapt to these changes.
- We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
- We do not lock, "pot", or keep control of your ECU. If you decide to take it to another tuner for an upgrade, all flashing ability is retained.
- We can bench flash your ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us (See Instructions Here). You can also send us a new ECU to be flashed. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.
- Bring your vehicle or ECU to our facility where we can do the ECU Upgrade here.
- Order our OBDII Flash cable to be able to flash between a stock and your tuned file. See Instructions Here
- 2016 Polaris RZR xP Turbo pr xP4 Turbo 925cc
- For reference this is a Bosch ME17.9.74 ECU.