VR Tuned ECU Flash Tune Porsche Cayenne 957 Turbo 4.8L V8 DFI 08-10

When it comes to Turbo Porsche s, there is nothing else that can give you as much power and performance as the ECU flash. The Cayenne Turbo is no different than the 911. It has so much uncracked potential that the ECU flash lets out making the 2008 - 2010 Cayenne Turbo a thrill to drive. The new DFI 4.8L engine is much more equipped over the previous 4.5L. With a gain of almost 70ft/lbs of torque, towing your other toys is like they are not even there. Because of the increased boost and horsepower, it is recommended to change your spark plugs to a 1 step colder plug if you have more that 10000 miles on yours. We also recommend upgrading to the Agency Power diverter valves. Expect to see boost increases to about 16psi in standard and 18psi in sport mode.

Crank Horsepower Ratings:

• Stock Power 500HP | 516ft/lbs
• Tuned Power 575HP | 605ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use our OBDII VR Tuned iFlash Cable. This REQUIRES a Windows PC. You can flash between tuned and stock at anytime.  See Instructions Here.
• Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle via the OBDII port.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection. See ECU removal instructions here.

For reference, this ECU is a Siemens SDI4.