VR Tuned ECU Flash Tune Volkswagen EOS 2.0L Turbo 200HP 06-15
Prix habituel
€600,00 EUR
Prix habituel
Prix soldé
€600,00 EUR
Prix unitaire
par
The Volkswagen EOS is a great front wheel drive turbo coupe. Using a similar TFSI 2.0L engine to the Golf, GTI, Jetta, the EOS can give just as good performance while remaining under the radar as a daily driver. The VR Tuned ECU flash is extremely easy to do boosting up your vehicles horsepower and torque. With our tune you gain quicker throttle response, faster turbo spool, and top end that pulls very hard to redline. The overall daily driving characteristics are vastly improved while providing you additional benefits that your car craves for!
Crank Horsepower Ratings:
Crank Horsepower Ratings:
- Stock Power: 200HP | 207ft/lbs
- Stage 1 Power: 240HP | 258ft/lbs
- Stage 2 Power: 260HP | 277ft/lbs
- #1 priority is our customer service to you!
- Our tuning is used worldwide. We have powered vehicles of all types.
- All ECU tunes can be reverted back to stock if necessary.
- With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
- Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
- If you add higher octane fuel, the ECU will adjust accordingly.
- We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
- Other custom enhancements are available if requested and applicable.
- We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!
- Use our OBDII VR Tuned iFlash Cable. This REQUIRES a Windows PC. The iFlash cable allows you to read and write your stock and tuned files. See Instructions Here.
- Bring your vehicle to our facility where we can use our Master Cable to flash your vehicle.
- We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.
- You can select to get both Stages of our Tune. The Stage 2 is usually for those looking to maximize the performance of their vehicle. Though not required unless stated, this is usually for those running a performance exhaust and at least 91-93 octane fuel. Can only be done if OBDII flashing is available.
- For this ECU Flash, we also offer the following features that are optional and can be selected:
- Pops and Bang Burble Tune
- Speed Limiter Raised - VMax
- Some features not listed can be requested during the File Upload process