VR Tuned ECU Flash Tune Jaguar XF X250 2.0L Turbo 240HP 12-15

The Jaguar xF 2.0L Turbo ECU flash is the only way to go when looking for more power out of the x250 chassis. The engine stands to gain big with just a ECU Tune. The VR Tuned upgrade adds more horsepower and torque over stock. The ECU flash maximizes the performance in the 2.0L turbocharged engine. With our performance calibration, you are able to gain improved power on the engine. Where your car is sluggish off the line, your newly flashed car picks up right away and pulls harder through the mid and top end RPM range. Overall, the driving characteristics are vastly improved while providing you additional benefits that your car craves for.

Crank Horsepower Ratings:

• Stock Power: 240HP | 251FT/LB
• Tuned Power: 274HP | 299FT/LB

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the DimSport handheld device. This REQUIRES a Windows PC. This is an OBDII tool to read and write the ECU. See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

For reference, this ECU is a BOSCH MED17.9.7 ECU.