Passa alle informazioni sul prodotto
1 di 1

VR Tuned

VR Tuned ECU Flash Tune Mercedes AMG C63 S 4.0L Bi-Turbo W205 510HP

Prezzo di listino €1.500,00 EUR
Prezzo di listino Prezzo di vendita €1.500,00 EUR
Imposte incluse. Spese di spedizione calcolate al check-out.

The Mercedes C63 S W205 sedan, coupe, or wagon is a monster of a car. The new 4.0L bi-turbo comes equipped with over 500 horsepower!. With the turbos located in the "V" of the engine, this thing makes some serious torque like a V8 should but keeps pulling to redline. Its front mid engine, rear wheel drive powertrain is something to fear. Like most turbocharged vehicles from Mercedes, there is more to gain. You can gain nearly 100 horsepower and over 100FT/LB of torque with our new ECU calibration. The low to mid range is where the peak gains happen increasing your 0-60 time. There is still plenty to gain on the top end. Overall, the driving characteristics are vastly improved while providing you additional benefits that your car craves for.

Crank Horsepower Ratings:

  • Stock Power: 510HP | 516ft/lbs
  • Stage 1 Power: 570HP | 630ft/lbs
  • Stage 2 Power: 596HP | 658ft/lbs

What are the benefits of VR Tuned?

  • #1 priority is our customer service to you!
  • Our tuning is used worldwide. We have powered Mercedes of all types.
  • With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
  • Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
  • If you add higher octane fuel, the ECU will adjust accordingly.
  • We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
  • Other custom enhancements are available if requested and applicable.
  • We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

  • Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
  • We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection. See ECU Removal Instructions Here.
  • Bring your vehicle to our facility where we can use our Master Cable to flash your vehicle.

Options:

  • You can select to get one or all of our Stage ECU Tunes. The Stage 2 is usually for those looking to maximize the performance of their vehicle. Though not required unless stated, this is usually for those running a performance exhaust and at least 91-93 octane fuel. Switching between stages can only be done if OBDII flashing is available.
  • For this ECU Flash, we also offer the following features that are optional and can be selected:
    • Pops and Bang Burble Tune
    • Speed Limiter Raised - VMax
    • Some features not listed can be requested during the File Upload process

For reference this ECU is a Bosch MED17.7.5.