Passa alle informazioni sul prodotto
1 di 1

VR Tuned

VR Tuned ECU Flash Tune Volkswagen Jetta MK6 2.5L 20V 170HP

Prezzo di listino €600,00 EUR
Prezzo di listino Prezzo di vendita €600,00 EUR
Imposte incluse. Spese di spedizione calcolate al check-out.
VR Tuned offers an ECU flash for your Volkswagen Jetta 2.5L 20V MKVI. With our ECU tune, you are able to gain improved performance on the engine. The biggest difference when you flash your car is the overall improvement of the power curve. Your car will have much better throttle response all the way to redline. Where your car is sluggish off the line, your newly flashed car picks up right away and pulls harder through the mid and top end RPM range.

Crank Horsepower Ratings:
  • Stock Power: 170HP | 177ft/lbs
  • Tuned Power: 182HP | 192ft/lbs
What are the benefits of VR Tuned?
  • #1 priority is our customer service to you!
  • Our tuning is used worldwide. We have powered vehicles of all types.
  • All ECU tunes can be reverted back to stock if necessary.
  • With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
  • Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
  • If you add higher octane fuel, the ECU will adjust accordingly.
  • We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
  • Other custom enhancements are available if requested and applicable.
  • We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!
How to Flash Your ECU?
  • Use the DimSport handheld device. This REQUIRES a Windows PC.  You can flash between these at anytime.  See Instructions Here.
  • Bring your vehicle to our facility where we can use our Master Cable to flash your vehicle.
  • We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for reinstallation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.
For reference, this ECU is a ME17 or MED17 depending on year.