VR Tuned ECU Flash Tune Audi S6 5.2 FSI V10 435hp C6 2004-2012

Your Audi S6 boasts an impressive mix of power and performance. With our new ECU tune, we can help your S6 gain improved performance of the engine. The biggest difference when you flash your S6 is the overall improvement to the power curve. Your car will have enhanced throttle response and where it is sluggish off the line, your newly flashed car picks up right away and pulls harder through the mid and top end RPM range. The characteristics are greatly improved while providing you additional benefits that your car craves.

Crank Horsepower Ratings:

• Stock Power: 435HP | 398ft/lbs
• Tuned Power: 463HP | 417ft/lbs

What are the benefits of VR Tuned?

• #1 priority is our customer service to you!
• Our tuning is used worldwide. We have powered vehicles of all types.
• All ECU tunes can be reverted back to stock if necessary.
• With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
• Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
• If you add higher octane fuel, the ECU will adjust accordingly.
• We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
• Other custom enhancements are available if requested and applicable.
• We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

• Use the DimSport handheld device. This REQUIRES a Windows PC.  You can flash between these at anytime.  See Instructions Here.
• Bring your vehicle to our facility where we can use our Master Tool to flash your vehicle.
• We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then ship it back to you for re-installation. We do not solder or modify the ECU board at all. All ECU tuning is done via bungy probes that have a needle tip to provide an electrical connection.

For reference, this ECU is a Bosch MED9.1.1.